Original link is: http://www.codeography.com/2012/09/23/howto-irc-server.html
While I like Campfire and HipChat and those other tools for
group collaboration there is just something nice about using an IRC
channel. Probably the most compelling reason is that I am going to have
my IRC client running anyway for other channels — so it would be nice
to just add a server and use the same client I am already using.
At Radius we had been using a public server for a little bit of
communication, but the converstaions starting becoming more technical
and wasn’t happy having things go through someone else’s server, and be
unencrypted. So I decided to setup my own. I give you the ultimate irc
The Ultimate IRC Server
The ultimate server consists of a few components:
- The IRC server itself (ircd-hybrid)
- an IRC bouncer (ZNC)
- a way to tunnel port 443 to the bouncer
- and maybe a bot that can post funny pictures of cats for you
I am using Ubuntu Server 12.04.1 LTS (ami-137bcf7a) running on a micro instance.
Install the IRC Server
sudo apt-get install ircd-hybrid sudo vim /etc/ircd-hybrid/ircd.motd
Create the password required to be the Oper:
WARNING: Please do not mix up themkpasswdprogram from/usr/sbinwith this one. If you are root, typingmkpasswdwill run that one instead and you will receive a strange error.
Edit the config file, this is well documented and there are plenty of
little tweaks you can make but make a couple little changes now:
sudo vim /etc/ircd-hybrid/ircd.conf
Comment out thehostparameter in thelistensection (about line 130 in the default ubuntu config)
host = “127.0.0.1″;
#host = “127.0.0.1″;
And increase themax_clientsin theserverinfosection:
max_clients = 2;
max_clients = 512;
This will open the server up to external connections (Note: make sure
you configure your instance to have these ports open, e.g. in EC2 you
will need to edit the security profile and open ports 443, 6664, and
6667), and allow more than 2 folks to connect from the same IP (which is
important since we will have everyone connect via ZNC running on this
Now restart the server
sudo /etc/init.d/ircd-hybrid restart
Now you should be able to fire up your favorite client and see if you
can get it to connect to the server. Once you have proven it works,
time to move onto the bouncer.
Install the IRC Bouncer
Originally I followed the guide from Dustin Davis but have a few tweaks:
sudo apt-get install znc znc --makeconf
Follow the guides to setup the server. I mostly choose the defaults, and enabled all the modules
What port would you like ZNC to listen on? (1025 to 65535): 6664 Would you like ZNC to listen using SSL? (yes/no) [no]: yes Would you like to create a new pem file now? (yes/no) [yes]: yes Listen Host (Blank for all ips): Number of lines to buffer per channel : 1000 Would you like to keep buffers after replay? (yes/no) [no]: yes
Configure ZNC to use the brand new IRC server that we just installed:
IRC server (host only): 127.0.0.1 [127.0.0.1] Port (1 to 65535) : 6667 [127.0.0.1] Password (probably empty): Does this server use SSL? (yes/no) [no]: Would you like to add another server for this IRC network? (yes/no) [no]: no Would you like to add a channel for ZNC to automatically join? (yes/no) [yes]: yes Would you like to add another channel? (yes/no) [no]: no Would you like to set up another user (e.g. for connecting to another network)? (yes/no) [no]: no Launch ZNC now? (yes/no) [yes]: no
Now you can run ZNC as that user and verify it works, and make tweaks to the config.
or with the webadmin module by pointing a browser to
To verify that this works with your local client you should just have
to change the port from 6667 to 6664. If you want to compare settings
my initial config file looked something like this.
Make ZNC a system daemon
At the end of the config keep it running and connect to it from your
local IRC client to make sure things are working. Once you have proven
it works time to set it up as a daemon that starts at boot. I used
Henner’s guide when I first set this up.
killall znc # just to make sure
Create the user and group
sudo addgroup --system znc sudo adduser --system --no-create-home --ingroup znc znc
Create the init script, I have the one I use up here
sudo vim /etc/init.d/znc
It’s pretty big, so you may want to curl it down
curl https://gist.githubusercontent.com/csexton/3772971/raw/efbe88004be70cb7f157e30aa1183ea5867d8de6/gistfile1.sh > /etc/init.d/znc
Copy over the ZNC config files to/etc, and update permissions
sudo mkdir /etc/znc sudo mv /home/$USER/.znc/* /etc/znc/ rm -R /home/$USER/.znc chown -R znc:znc /etc/znc sudo chown -R znc:znc /etc/znc sudo chmod +x /etc/init.d/znc
Start ‘er up
sudo /etc/init.d/znc start
Setup port forwarding
Forward from 443 to 6664 to work around firewalls.
This step is not required if your network does not block the ports we
are using. But it is still nice to use in case you ever find yourself
on one. Also you would not want to do this on a server that is serving
webpages over https.
sudo apt-get install rinetd sudo vim /etc/rinetd.conf
Edit that file to include a new forwarding rule
0.0.0.0 443 127.0.0.1 6664
sudo /etc/init.d/rinetd restart
If you enabled the webadmin module in ZNC you should now be able to point your browser tohttps://yourhostnameand edit your ZNC config (and let folks edit their accounts, configure
modules and change passwords). Yes, ZNC uses the same port for IRC
connections and for the admin page.
Now you should have an irc server running on port 6667, a bouncer
running on port 6664, and a tunnel for the bouncer from port 443.
I just used the web admin module to setup accounts for everyone on my
team. I wound up turning off external access to 6667 so that I didn’t
have to secure ircd, and everyone just goes through ZNC.
You might want to setup an bot to do your bidding, I use radbot. You should fork
I run this on a micro instance on Amazon’s EC2, so it costs us about
$14/month — but given that I use the server for other things as well it
doesn’t really cost the full $14.